Milliput

Milliput 05 Superfine White Milliput

Superfine White Milliput - Image 1
Manufacturer: Milliput
Product code: MPT05
Availability: in stock!
$12.08 or 7700 pts.

Includes 0% VAT
when shipping to the country: United States
To change the country click here

Basic information

ManufacturerMilliput
Product codeMPT05
Weight:0.12 kg
Ean:5035167000506
Capacity113g
Added to catalog on:12.17.2015
Tags:Epoxy-Putty

Superfine White Milliput (113,4 g)

Superfine White Milliput is specially formulated for the restoration of porcelain and ceramics where a fine finish is desired. Milliput also allows for missing parts to be reconstituted. Superfine White Milliput is recognised as one of the finest materials available for ceramic restoration. Recommend products: Standard Milliput, Epoxy Putty Quick Dry and BROWN Stuff Kneadatite 15cm (6inches).

Typical applications:

  • Ceramic restoration
  • Picture frame restoration
  • Jewellery making
  • Modelling
  • Sculpting
  • Repair and filling UPVC
  • Swimming pool repairs
  • Chips, scratches and other imperfections in baths, showers, sinks, tiles and white kitchen appliances

Using Milliput - A two part epoxy putty

Milliput is the trade name for our epoxy putty. We produce five grades: Standard (Yellow/Grey), Terracotta, Silver Grey, Black and Superfine White. Each grade is presented in similar packs containing 2 x 56,7gm. sticks and the general instructions for preparation and usage are the same.

Once equal quantities of each stick have been mixed the resultant putty is at first soft and highly adhesive and then gradually hardens. Speed of hardening is dependant on temperature and at normal temperatures (20-25 deg C) Milliput becomes rock hard in three to four hours. By the application of heat the setting time can be reduced.

After setting hard Milliput continues to cure and is fully cured after an elapse of time equal to the setting time at the same temperature. Once fully cured Milliput can be machined, drilled, tapped, turned, filed, sawn, sandpapered and painted.

Milliput is an excellent adhesive and will bond any of the following to itself or to any of the others - wood, brick, cement, metals, concrete, plastics, glass etc, but note that Milliput is not intended as a thin layer adhesive. Milliput will set under water and is heat resistant up to 130°C.

Mix together equal parts of each stick from the pack. Knead and roll in the hands for at least 5 minutes until the colours merge and become uniform and no streaks can be seen, and then mix for another minute. The surfaces to which the putty is applied should be free from grease and dirt. Smooth surfaces should be cleaned with a suitable solvent or with soap and warm water to remove dirt and grease. Abrading the surface will improve adhesion. the putty may now be applied and will set hard in three to four hours without shrinking.

At all stages from initial mixing to final setting Milliput responds to the use of water. To aid manipulation and avoid sticking, fingers and tools should be kept moistened with water. There are certain instances when work may be carried out in a gentle stream of water under a tap. To obtain a smooth finish, mould or apply Milliput and then immediately wipe and smooth gently with wet finger or with a fine textured moist cloth.

When tools have been used for applying or contouring Milliput they should be cleaned immediately after use. If the putty is allowed to harden on it will be almost impossible to remove.

In the putty state Milliput, like most chemicals in domestic use, may cause irritation to sensitive skins. When mixing the two components it is advisable to use rubber gloves or throw-away polythene gloves. When rubber gloves have been used wash them immediately after use, and whilst still on the hands, using running water. If the hands have been used for mixing or manipulating Milliput wash them immediately after use with toilet soap and warm water.

When casting or mouldmaking talc or a light oil can be used as a releasing agent.

Milliput products are resistant to frost, heat, solvents and most fuels.

Colouring Milliput

There are a number of ways of colouring Milliput.

Different colours can be obtain by cross-mixing or blending from the range of colours that Milliput is available in.

Powder pigment can be mixed in, in small quantities, so that the mixture does not become too dry and crumbly. Strong powder pigment rather than powder paint is better as smaller amounts can be used.

Liquid colourings, like enamel paints, oil paints, spirit based-dyes or pigments can also be used to colour Milliput, but liquids or pastes may be difficult to introduce into the putty, again small quantities should be used, to avoid creating a very wet mix that may be difficult to mix.

In all cases the Milliput should be thoroughly mixed by rolling & folding about 30-35 times. This will ensure that all the hardener has come in good contact with the resin and the Milliput will then set correctly.

Mistake in the description? Report problem
Customer reviews
Add a review of: Superfine White Milliput
...
Added to catalog on: 12.17.2015
Availability: in stock!
  • item available
  • item unavailable
  • item available on request
  • delivery
  • unavailable
  • 1 pcs.
  • 2 pcs.
  • 3-5 pcs.
  • 6-10 pcs.
  • above 10 pcs.
Is it possible to back order an item that is not listed on the website, or that is listed as "unavailable"?
Similar items

Manufacturer: Milliput
Product code: MPT01
Availability: in stock!

$7.13 or 4500 pts.

Manufacturer: Milliput
Product code: MPT06
Availability: in stock!

$12.66 or 8000 pts.

Manufacturer: Milliput
Product code: MPT04
Availability: in stock!

$10.32 or 6600 pts.

Manufacturer: Milliput
Product code: MPT03
Availability: in stock!

$9.69 or 6200 pts.

Manufacturer: Milliput
Product code: MPT02
Availability: 2-6 weeks

$5.81 or 3700 pts.

Manufacturer: Green Stuff World
Product code: GSW9003
Availability: in stock!

$8.81 or 5600 pts.

Manufacturer: Green Stuff World
Product code: GSW9004
Availability: in stock!

$6.30 or 4000 pts.

Manufacturer: Green Stuff World
Product code: GSW9002
Availability: in stock!

$11.97 or 7600 pts.

Manufacturer: Tamiya
Product code: tam87145
Availability: in stock!

$22.89 or 13900 pts.

Manufacturer: Tamiya
Product code: tam87143
Availability: in stock!

$22.46 or 13600 pts.

Manufacturer: Tamiya
Product code: tam87051
Availability: in stock!

$6.88 or 4200 pts.

Manufacturer: Tamiya
Product code: tam87052
Availability: in stock!

$6.79 or 4100 pts.